Service area · Georgian Bay shore
Radiant heating design for Collingwood & The Blue Mountains.
Warm floors under ski boots, a driveway that clears itself, and a heating system sized room by room before a single loop goes down. We design and install radiant and hydronic systems along the southern Georgian Bay shore, for homeowners, chalet owners and the builders who build for them.
What we do on the shore
Radiant heating on the Georgian Bay shore
From the design to the last balanced zone, for new builds, renovations and existing homes.
Radiant heating design
Room-by-room heat-loss calculations to the CSA F280-12 methodology, loop layouts, manifold schedules and water temperatures, for our own installs or as a design-only package for your builder or installer.
Whole-home radiant floors
New builds and major renovations, designed from the slab up, with every loop pressure-tested before and during the pour.
Snow-melt driveways & walkways
Glycol loops under concrete or pavers that clear snow and ice automatically. On the Georgian Bay snow belt, that matters.
Boilers & mechanical rooms
Condensing boilers sized from a real heat-loss calculation, never a guess, with outdoor reset and clean, serviceable piping.
Retrofits & basements
Existing homes too: loops can go into a thin overpour, under the subfloor between joists, or into an addition or finished basement.
Garage heat & extras
Garage and workshop heat, heated towel bars and hydronic baseboards, all run from the same warm-water system as your floors. How hydronic systems work
Built for the snow belt
Why radiant makes sense here
Collingwood and The Blue Mountains sit in the Georgian Bay snow belt, and a lot of the homes here are built around winter.
The driveway, on the same system
Snow-melt loops can go in under a new driveway, walkway or front steps at the same time as the floor heat, sized together from one heat-loss calculation.
Warm where you feel it most
Entries, mudrooms and bathrooms are where cold floors hit hardest. Radiant heats the floor itself, so tile and stone stay warm underfoot all winter.
Zoned for how you use it
Every loop runs back to the manifold, so each area can hold its own temperature on its own schedule: keep the place tempered while you’re away and bring the rooms you use up when you arrive.
How it works
From first visit to warm floors
-
Step one
Your plans, or a site walk
We come out to Collingwood or The Blue Mountains to walk your home, or start from your drawings: a new build, an addition, a finished basement or a single bathroom.
-
Step two
Heat loss & design
A room-by-room heat-loss calculation to the CSA F280-12 methodology, then the loop layout, manifold schedule and water temperatures your space actually needs. How our designs work
-
Step three
Rough-in & testing
Insulation down, loops laid exactly to the design, and every loop pressure-tested before and during the pour.
-
Step four
Commissioned & documented
Every zone commissioned and balanced, the paperwork in your file, and a walkthrough of how it all works before we leave.
From our projects
What the work looks like before the floor goes down
Local questions, answered
Radiant heating questions from the shore
Do you work in both Collingwood and The Blue Mountains?
Yes. We design and install across Collingwood, The Blue Mountains and the rest of the southern Georgian Bay shore, including Wasaga Beach.
Can a snow-melt driveway run off the same boiler as my floors?
Yes, when it’s designed that way from the start. The snow-melt loops use glycol and get their own zone, and the heat source is sized from the heat-loss calculation so one boiler handles the floors and the driveway without short-cycling.
My builder already has an HVAC designer. Can you still help?
Yes. We’ll build to your engineer’s or designer’s drawings and flag anything we’d question before rough-in, or take the radiant design scope ourselves and coordinate with your BCIN-registered designer for the permit set.
Can radiant go into an existing chalet or home?
Often, yes. Depending on the home, loops can go into a thin overpour, under the subfloor between joists, or into an addition or finished basement. A site visit tells us which route fits.
Your project next
Warm floors in Collingwood & The Blue Mountains
Book a free consultation and we’ll walk your home or your plans, run the heat-loss numbers, and tell you exactly what radiant would take. No pressure, no guesswork.
