Service area · Midland & Penetanguishene
In-floor heating in Midland & Penetanguishene.
Radiant in-floor heating for homes, cottages and new builds in Midland, Penetanguishene and the shoreline around them on southern Georgian Bay. Every system starts with a room-by-room heat-loss calculation and ends with a commissioned, balanced, documented installation.
What we do in Midland & Penetang
In-floor heating and hydronics on Georgian Bay
Homes, cottages and new builds, plus the boiler that runs it all.
Radiant heating design
Room-by-room heat-loss calculations to the CSA F280-12 methodology, loop layouts, manifold schedules and water temperatures, for our own installs or as a design-only package for your builder or installer.
Whole-home radiant floors
New builds and major renovations, designed from the slab up, with every loop pressure-tested before and during the pour.
Retrofits & basements
Existing homes too: loops can go into a thin overpour, under the subfloor between joists, or into an addition or finished basement.
Boilers & mechanical rooms
Condensing boilers sized from a real heat-loss calculation, never a guess, with outdoor reset and clean, serviceable piping.
Snow-melt driveways & walkways
Glycol loops under concrete or pavers that clear snow and ice automatically.
Garages, shops & extras
Heated garage and shop floors, heated towel bars and hydronic baseboards, all run from the same warm-water system as your floors, plus yearly service for the whole system.
Radiant on the bay
Three common starting points
From older homes in town to cottages on the water, here’s where in-floor heating usually starts.
Retrofit, room by room
Loops can go into a thin overpour, under the subfloor between joists, or into an addition or finished basement. A site visit tells us which route fits.
Sized for the exposure
Homes on the water face wind off the bay all winter. A room-by-room heat-loss calculation sizes each room for the exposure it actually has.
Sized to your home, not the old label
Replacing a boiler? We size the new one from a heat-loss calculation on your actual home, because oversized boilers short-cycle and waste fuel.
How it works
From first visit to warm floors
-
Step one
Your plans, or a site walk
We come out to Midland to walk your home, or start from your drawings: a new build, an addition, a finished basement or a single bathroom.
-
Step two
Heat loss & design
A room-by-room heat-loss calculation to the CSA F280-12 methodology, then the loop layout, manifold schedule and water temperatures your space actually needs. How our designs work
-
Step three
Rough-in & testing
Insulation down, loops laid exactly to the design, and every loop pressure-tested before and during the pour.
-
Step four
Commissioned & documented
Every zone commissioned and balanced, the paperwork in your file, and a walkthrough of how it all works before we leave.
From our projects
What the work looks like before the floor goes down
Local questions, answered
In-floor heating questions
Do you work in both Midland and Penetanguishene?
Yes, and in the shoreline communities around them. For the right project, we travel further along the bay.
Can radiant work in a cottage that isn’t heated all winter?
Yes, if it’s designed for it. Zoning lets each area hold its own temperature on its own schedule, and where a building may go unheated, the design can call for freeze protection such as a glycol mix in the loops.
Does radiant heat the whole house, or just the floors?
A properly designed hydronic radiant system is whole-home heating. The floor is simply the radiator. We size it with a room-by-room heat-loss calculation so it holds temperature on the coldest days.
Do you do the plumbing too?
Yes. We handle heating and plumbing, so the radiant system and the plumbing scope can go under one contract with one trade. See how our systems work.
Your project next
Warm floors on Georgian Bay
Book a free consultation and we’ll walk your home or your plans, run the heat-loss numbers, and tell you exactly what radiant would take. No pressure, no guesswork.
Other areas we serve
