Service area · Innisfil
In-floor heating in Innisfil, just down the road.
Radiant in-floor heating for new builds, additions and existing homes across Innisfil, on the western shore of Lake Simcoe, from Alcona and Lefroy to Stroud and Cookstown. We’re based in Barrie, next door, and every system starts with a room-by-room heat-loss calculation.
What we do in Innisfil
In-floor heating and hydronics in Innisfil
New builds, additions, basements and single rooms, plus the boiler that runs it all.
Radiant heating design
Room-by-room heat-loss calculations to the CSA F280-12 methodology, loop layouts, manifold schedules and water temperatures, for our own installs or as a design-only package for your builder or installer.
Whole-home radiant floors
New builds and major renovations, designed from the slab up, with every loop pressure-tested before and during the pour.
Retrofits & basements
Existing homes too: loops can go into a thin overpour, under the subfloor between joists, or into an addition or finished basement.
Boilers & mechanical rooms
Condensing boilers sized from a real heat-loss calculation, never a guess, with outdoor reset and clean, serviceable piping.
Snow-melt driveways & walkways
Glycol loops under concrete or pavers that clear snow and ice automatically.
Garages, shops & extras
Heated garage and shop floors, heated towel bars and hydronic baseboards, all run from the same warm-water system as your floors, plus yearly service for the whole system.
Radiant in an Innisfil home
Three common starting points
Whether it’s a new build or a home you’ve lived in for years, here’s where in-floor heating usually starts.
Designed with the house
Radiant goes in with the slab or the subfloor and is booked to your build schedule. We work from your drawings and coordinate with your builder.
The coldest floor, made warm
A basement slab is one of the best places for radiant: loops over rigid insulation, then the finished floor. It turns the coldest floor in the house into a warm one.
Warm floors by the water
Homes near the lake see wind off the water all winter. A room-by-room heat-loss calculation sizes each room for the exposure it actually has.
How it works
From first visit to warm floors
-
Step one
Your plans, or a site walk
We come out to Innisfil to walk your home, or start from your drawings: a new build, an addition, a finished basement or a single bathroom.
-
Step two
Heat loss & design
A room-by-room heat-loss calculation to the CSA F280-12 methodology, then the loop layout, manifold schedule and water temperatures your space actually needs. How our designs work
-
Step three
Rough-in & testing
Insulation down, loops laid exactly to the design, and every loop pressure-tested before and during the pour.
-
Step four
Commissioned & documented
Every zone commissioned and balanced, the paperwork in your file, and a walkthrough of how it all works before we leave.
From our projects
What the work looks like before the floor goes down
Local questions, answered
In-floor heating questions
Do you work across all of Innisfil?
Yes. We work across the Town of Innisfil, from Alcona and Lefroy to Stroud and Cookstown, and we’re based next door in Barrie.
Can you add in-floor heating to an existing Innisfil home?
Often, yes. Depending on the home, loops can go into a thin overpour, under the subfloor between joists, or into an addition or finished basement. A site visit tells us which route fits your space.
What flooring works over radiant heat?
Tile, stone, polished concrete, engineered hardwood and luxury vinyl all perform well over radiant. We design the system around your finished floor, not the other way around.
Do you do the plumbing too?
Yes. We handle heating and plumbing, so the radiant system and the plumbing scope can go under one contract with one trade. See how our systems work.
Your project next
Warm floors in Innisfil
Book a free consultation and we’ll walk your home or your plans, run the heat-loss numbers, and tell you exactly what radiant would take. No pressure, no guesswork.
Other areas we serve
